Bar rail brackets are an integral a part of any bar rail mission. Critically, with out them, your bar rail would simply be a bit of tubing laying on the ground.
There are a number of issues to think about in the case of selecting the best bracket for mounting your bar rail. Whereas the visible enchantment of the brackets is essential, you additionally should bear in mind the kind of floor that you’re going to be mounting your bar rail tubing to. KegWorks gives a wide range of brackets to suit any methodology of bar foot rail set up.
Kinds of Bar Rail Brackets
Brackets could be mounted to both the entrance of your bar or the ground under it in addition to brackets that connect each surfaces to safe your bar foot rail in place. When deciding on which floor to make use of, make sure that the fabric of your bar face or flooring is ready to be drilled into and that it might probably correctly assist the load of your foot rail.
Bar Mount Brackets
Bar mount brackets are brackets that mount on to the face of your bar. These brackets are best to wash below and provides your bar a novel look. One benefit to utilizing bar mount brackets is that it lets you select a customized peak on your bar foot rail. This turns out to be useful when you want brackets taller than the usual 6″. Many of the different brackets will likely be mounted at a set peak from the ground. These brackets include a threaded again entry bolt is used for weight-bearing, so that you MUST have entry to the again of the bar to put in these brackets:
Mixture Brackets
Mixture bar rail brackets are our hottest model as a result of they’re straightforward to put in and have a basic look. They mount to the face of the bar and relaxation on the ground for assist. In contrast to our fundamental bar mount brackets, you do not want entry to the again of the bar to put in the mixture brackets. The peak of a mix bracket bar foot rail is roughly 6″ (measured from the ground to the middle of the realm for the tubing). The mixture bracket will sit roughly 6″-7″ away from the dealing with of your bar.
Flooring Mount Brackets
In the event you guessed that flooring mount brackets mount to the ground, you might be appropriate! As with mixture brackets, this eliminates the necessity for entry to the again of your bar for set up. Flooring mount brackets provide the added flexibility of putting in them nearer or farther away from the dealing with of your bar as desired. A flooring mount bracket will keep away from any danger of harm that may very well be brought on by mounting a rail instantly onto a bar. When mounted correctly, the bar rail will sit 5.5″-6″ off the ground.
90-degree Brackets
KegWorks unique 90-degree brackets connect securely to each the face of your bar (or wall) and the ground for further stability. With two contact factors, this double-footed bar rail bracket combines a sturdy construct and a sensible design. The included 1 ½” mounting screws make set up very simple. These brackets sit precisely 5.89″ from the ground to the middle of the tubing, and 5.89″ from the dealing with of the bar to the middle of the tubing.
Middle Submit Brackets
Middle put up brackets are nice to be used as both a bar foot rail or bar handrail. Their low-profile design makes them further versatile. These brackets are simply 4.5″ in whole peak. Middle put up brackets sit roughly 3.5″ from the ground, bar dealing with, or wall that they’re mounted upon to the middle of the tubing. They’ll slot in tight areas, be used as handrail, or be used as foot rail for bars with decrease chairs or stools.
Rounded Middle Submit Brackets
Rounded middle put up brackets and tall rounded middle put up brackets are unique to KegWorks, and add a barely totally different contact than the middle put up brackets. Since there is just one assist level with these brackets, it’s greatest to area these rounded middle posts not more than 36 inches aside for stability. They sit roughly 4.75″ from the ground to the middle of the tubing.
For people who need their bar rail put in increased or in case your stools are increased up, then rounded middle posts offer you further choices in the case of set up. Tall rounded middle posts sit roughly 6.5″-7″ from the ground to the middle of the tubing.
Up to date Brackets
Up to date brackets are our most versatile model of bar rail brackets. They mix a classy, fashionable look with the power to be mounted to the face of your bar or to the ground in entrance of your bar. For bar-mounted functions, they’re put in in the identical method as conventional bar mount brackets with three mounting screws and a threaded bolt that mounts from behind the bar. In the event you go along with the floor-mounted methodology for set up, then you definitely solely want to make use of the mounting screws to safe the brackets to your floor. These are an awesome possibility when you’re not fully positive on the right way to mount your bar rail or need to discover each choices additional.
Customized Bar Rail Brackets
Customized brackets are a wonderful answer when you want brackets which are taller than regular. KegWorks Bar Rail Specialists can have customized bar rail brackets fabricated to match your mission’s specs based mostly on a technical drawing that you simply provide. The customized brackets are constructed to spec utilizing chrome steel to make sure a sturdy and reasonably priced answer, after which powder coated to match the end of your bar rails.
Industrial Black Pipe Brackets
Industrial black pipe bar foot rail is changing into a very talked-about model. As a substitute of brackets, industrial black pipe bar rail is secured by utilizing a connector piece and 90 diploma elbow that screws right into a flange that’s mounted to the ground. The energy of the commercial black pipe model permits the installer flexibility in desired peak. The connector piece is 4″ tall when totally screwed in, however they’ll sit as much as 7″ off the bottom and nonetheless preserve their sturdiness.
What number of brackets will you want?
When planning your bar rail mission, realizing precisely what number of brackets you’ll want earlier than you order your tubing and parts is essential. Laying out how your mission will look will show you how to decide this. For greatest apply, use painter’s tape to map out precisely the place you propose to place the bar rail and make a sketch. Your brackets needs to be positioned 6 inches from every finish of the rail (at most) and each 4 ft by way of the center for correct assist.
How excessive ought to your bar foot rail be?
The bar foot rail peak from the ground will rely upon the bracket you select. For sure brackets, you possibly can resolve the peak of a bar foot rail from the ground. With different brackets, the right bar foot rail peak is mounted. The bar rail will sit roughly 6″ from the ground to the middle of the bar rail. For instance, in case you have 8 ft of tubing, you’ll want one bracket on every finish and one within the middle, for a complete of three brackets.
We now have an entire information to Planning & Putting in Bar Foot Rail that can assist you get began along with your bar rail mission.
With out the sturdy assist of bar foot rail brackets, you’d by no means be capable to set up a cushty bar rail in your area. That’s why we feature a wide range of bar foot rail brackets in easy-to-install types and finishes. Regardless of which end or bracket model you select, you possibly can make certain that a bar foot railing will supply consolation and magnificence for years to come back.
Begin constructing your bar foot rail by searching our assortment of bar rail by end. Have questions? Be happy to provide us a name at 866-249-2337 or contact us immediately!